TEKVOX TekTouchPad - Manual (Page 12)

12
Use the Set option to select the on state of a button.
Blink
This option causes a button to flash at 1 second intervals between its on and off
states.
Color
The Color option allows for setting the button face to a user selectable color.
All commands have the
“Apply to All” option which will apply the action to all defined
buttons.
To apply the Lamp Command to the list, click on “OK” which returns control
to the Command Editor dialog.
Goto Page
The Goto Page provides a command to
switch display pages programmatically.
Once the command is set either by double
clicking or drag and drop, another dialog
pops up allowing for the entry of the button
command parameters. The Page No.
defines which page to switch while the
Press or Release options determine which
phase of the button action to execute the
page switch on.
To apply the Goto Command to the list, click on “OK” which returns
control to the Command Editor dialog.
Output
Current use of the output allows for a logic output to
control a relay or other device. The output can be set
to Open or Closed. To create a pulse place the
Closed status in the Press side and the Open status
in the release.