TEKVOX TekTouchPad User Manual
Page 25
TekTouchPad Configuration User’s Guide
25
TEKVOX, Inc.
7.
Click into the “Button Label” box, and replace “undefined” with the desired label
nomenclature
, in this case “TEST”. Typically with the default font, you may enter up to 9
characters per line. Use the carriage return to enter a second line if desired.
8.
Double click on the “Serial Command” option located in the left window. A new window
will appear allowing for ASCII command data entry and select the command you want
the button to send when pressed. You can also enter your own commands.
Serial Command Screen after adding ASCII command characters
Note: The “\0D” or “\r” is the nomenclature for inserting a carriage return while “\0A” or
“\n” would be used for a line feed.
Command Editor Screen after changes made