beautypg.com

Final assembly and check – Paxton Superchargers 5.7L Dodge Hemi User Manual

Page 39

background image

1

P/N: 4809650

©2004 Paxton Automotive

All Rights Reserved, Intl. Copr. Secured

11NOV04 v1.0 03DodgeHemi(4809650v1.0)

Section 15

FINAL ASSEMBLY AND CHECK

15. FINAL ASSEMBLY AND CHECK

A.

If your battery was disconnected, reconnect

it.

B.

If your vehicle has gone over 10,000 miles

since its last spark plug change, you will

need to change the spark plugs now before

test driving the vehicle.

C.

Check all fittings, nuts, bolts and clamps for

tightness. Pay particular attention to oil and

fuel lines around moving parts, sharp edges

and exhaust system parts. Make sure all

wires and lines are properly secured with

clamps or wire ties.

D.

Check all fluid levels, making sure that your

tank(s) is/are filled with 91 octane or higher

fuel before commencing test drive.

E.

Start the engine and allow to idle for a few

minutes.

F.

Recheck to be sure no hoses, wires, etc. are

near exhaust headers or moving parts and

check for any signs of fluid leakage.

Recheck all fluid levels.

G.

PLEASE TAKE SPECIAL NOTE:

Operating the vehicle without ALL subas-

semblies completely and properly installed

may cause FAILURE OF MAJOR

COMPONENTS.

H.

Test drive the vehicle.

I.

Read the Street Supercharger System

Owner’s Manual and RETURN THE

Warranty REGISTRATION FORM within

thirty (30) days of purchasing your super-

charger system to qualify for the 3-year lim-

ited warranty.

15.

FINAL ASSEMBLY AND CHECK