Paxton Superchargers 5.7L Dodge Hemi - Manual (Page 34)

2
P/N: 4809650
©2004 Paxton Automotive
All Rights Reserved, Intl. Copr. Secured
11NOV04 v1.0 03DodgeHemi(4809650v1.0)
H. Attach the supplied 3/4" short 90° hose to
the inlet of the water pump and connect to
the previously installed brass fitting at the
bottom of the reservoir. Secure the hose
using the supplied nylon ratchet clamps.
I. Mark two mounting locations using the
water pump reservoir assembly bracket as a
template on the passenger side inner frame
rail. Drill and secure the water pump reser-
voir assembly to the frame rail using the
supplied sheet metal screws.
Fig. 12-d
J. Cut the harness for the water pump leaving
as much of the wires intact from the pump.
Install a supplied ring terminal onto the
brown (negative) wire and secure to one of
the water pump reservoir assembly mount-
ing screws.
Fig. 12-e