Paxton Superchargers 5.7L Dodge Hemi User Manual
Page 26
2
P/N: 4809650
©2004 Paxton Automotive
All Rights Reserved, Intl. Copr. Secured
11NOV04 v1.0 03DodgeHemi(4809650v1.0)
5/16" fuel hose to the inlet of the FMU and
secure using a supplied clamp. Route the
open end of the 5/16" fuel hose to the open
barb of the TEE fitting, trim the hose for
best fitment and secure using a supplied
hose clamp.
G.
Cut the 5/16" fuel hose previously installed
from the supplied fuel pump outlet to the
factory fuel line, install the supplied TEE fit-
ting at this connection and secure it using
two supplied hose clamps. Attach a length of
5/16" fuel hose to the outlet of the FMU and
secure using a supplied clamp. Route the
open end of the 5/16" fuel hose to the open
barb of the TEE fitting, trim the hose for
best fitment and secure using a supplied
hose clamp.
H.
Route the hoses away from sharp or hot
objects and secure using the supplied wire
ties.
I.
Attach an open end of the supplied 5/32"
vacuum line onto the vacuum port of the
previously installed FMU. Route the vacu-
um line along the frame rail and into the
engine compartment near the factory brake
booster mounted on the vehicle’s firewall.
Secure the hose line away from any sharp,
hot, or moving objects using the supplied
wire ties. The vacuum line with be attached
to a vacuum source at a later step.