Denon AVR-2808CI - Manual (Page 63)

Multi-zone Operations
Turning the Power On and Off
G Operation on the main unitH
Press or for the zone to be operated.
When the power turns on, the multi-zone indicator (
or )
lights on the display.
G Operation on the remote control unitH
In the zone mode you want to operate, press [ON] or [OFF].
Selecting the Input Source
G Operation on the main unitH
q Press and select the zone to be adjusted.
w Turn .
G Operation on the remote control unitH
In the zone mode you want to operate, press [SOURCE SELECT].
Adjusting the Volume
G Operation on the main unitH
q Press and select the zone to be adjusted.
w Turn to adjust.
G Operation on the remote control unitH
In the zone mode whose volume you want to adjust, press [VOLUME].
– – – –70dB ~ –40dB ~ +18dB [Variable range]
The volume can be adjusted when menu “Manual Setup” – “Zone
Setup” – “(select the zone)” – “Volume Level” is set to “VAR”. The
volume can be increased up to the value set at menu “Manual Setup”
– “Zone Setup” – “(select the zone)” – “Volume Limit” (vpage 30).
SOURCE SELECT
VOLUME
Turning off the Sound Temporarily
In the zone mode for which you want to mute the sound, press
[MUTE].
The sound is reduced to the level set at menu “Manual Setup” – “Zone
Setup” – “(select the zone)” – “Mute Level” (vpage 30).
To cancel, either adjust the volume or press [MUTE] again.
The setting is canceled when the zone’s power is turned off.
The source selected for ZONE2 is also output from the recording
output connectors.
NOTE
• When the input source to which the digital input connectors
(OPTICAL/COAXIAL) are assigned is selected in ZONE2 or ZONE3,
playback is only possible if the digital signal being input is in PCM
(2-channel) format.
• Digital audio signals input from the HDMI connectors cannot be
played in multi-zone.
• When certain digital signals are being input, noise may be output
from the ZONE2 and ZONE3 audio output connectors.
0
Get
ting Star
ted
Connections
Set
up
Pla
ybac
k
Remot
e Contr
ol
Multi-Zone
Inf
or
mation
Tr
oubleshooting
About the button names in these explanations
< > : Buttons on the main unit
[ ] : Buttons on the remote control unit
Button name only:
Buttons on the main unit and remote control unit
[OFF]
[ON]
[MUTE]
VOLUME
SOURCE SELECT
(Sub remote control unit)
[MUTE]
SOURCE
SELECT
[ON]
[OFF]
VOLUME
[ AMP]
[ON]
[OFF]
(ZONE3
mode) (ZONE2
mode)
(Main remote control unit)
AVR2808CIEU.indd 63 2007/06/20 8:58:35