Denon AVR-2808CI - Manual (Page 39)

Antenna Aiming
Adjust the XM radio reception sensitivity.
Satellite
Indicate satellite signal strength.
Terrestrial
Indicate terrestrial signal strength.
[Input source] XM
DTS NEO:6
: The signals are decoded in DTS NEO:6 for
playback.
Cinema
: This mode is suited for movie sources.
Music : This mode is suited for music sources.
neural
: It is possible to play analog input signals and
PCM (2-channel, 48 kHz or less) in the surround
mode.
This is the optimum mode for playing sources
recorded in XM HD Surround (vpage 63).
Surround Playback of 2-channel Sources
DOLBY PLgx
or DOLBY PLg
: The signals are decoded in DOLBY PLgx or
DOLBY PLg for playback.
Cinema
: This mode is suited for movie sources.
Music : This mode is suited for music sources.
Game : This mode is suited for games.
Pro Logic : This is the Pro Logic playback mode. This can
be selected when playing with a DOLBY PLg
decoder. When this mode is selected, “DOLBY
PL” is displayed.
Standard Playback
This is the standard mode for enjoying surround sound according
to the program source.
Surround Modes
To select these surround modes using the buttons on the main unit
and main remote control unit, press the STANDARD button. The mode
switches each time the button is pressed.
n When using a surround back speaker
[Selectable items] DOLBY PLgx DTS NEO:6 neural
n When not using a surround back speaker
[Selectable items] DOLBY PLg DTS NEO:6 neural
Get
ting Star
ted
Connections
Set
up
Pla
ybac
k
Remot
e Contr
ol
Multi-Zone
Inf
or
mation
Tr
oubleshooting
Source Level
Corrects the playback level of the selected input source’s audio input.
[Variable range] –12dB ~ 0dB ~ +12dB
For input sources for which “HDMI” and “Digital” are set at the menu
“Assign” setting, the analog input level and digital input level can be
set separately.
Other
Make various other settings.
Video Select
Switch video input source while listening to audio signal.
[Selectable items]
DVD HDP TV/CBL SAT VCR DVR V.AUX
:
Select video input source to view.
Source
:
The video and audio for the same input source are played.
Operating from the main unit
Press the VIDEO SELECT button, then turn the SOURCE SELECT knob until
the desired picture appears.
b
To cancel, press the main unit’s VIDEO SELECT button, then turn the
main unit’s SOURCE SELECT knob and select “Source”.
NOTE
• It is not possible to select HDMI input signals.
• When playing HDMI video input signals, the analog video signal of
another input source cannot be selected for the HDMI video output.
• Input sources for which “Delete” is selected at “Source Delete”
cannot be selected.
Video Convert
Automatically convert video input signal to monitor output format.
[Input source] DVD HDP TV/CBL SAT VCR DVR
V.AUX
[Selectable items]
ON
: Enable conversion.
OFF
: Disable conversion.
Shuffle
Make settings for shuffle mode.
[Selectable items]
Songs
: Shuffle all songs.
Albums
: Shuffle songs from current album only.
OFF
: Cancel shuffle mode.
This can be selected for input sources for which “Assign” is assigned
at the “iPod dock” setting.
Display Condition
Signal strength is strong
Signal strength is good
Signal strength is marginal
Signal strength is weak
No signal
AVR2808CIEU.indd 39 2007/06/20 8:58:11