Denon AVR-2808CI User Manual
Page 47
Presetting Radio Stations
(Preset Memory)
Your favorite broadcast stations can be preset so that you can tune
them in easily. Up to 56 stations can be preset.
1
Tune in the broadcast station you want to preset.
2
Press
[MEMO]
.
3
Press
[A ~ G]
to select the block in which the station is
to be preset, then press
[CHANNEL]
or
[1 ~ 8]
to select
the preset number.
b
The memory block can also be selected by pressing [SHIFT].
4
Press
[MEMO]
again to complete the setting.
• To preset other stations, repeat steps 1 to 4.
• Stations can be preset automatically at menu “Input Setup” – “Auto
Preset” (vpage 34).
NOTE
Preset stations are erased by overwriting them.
1
Either turn
or press
[TUNER]
(AMP mode) to select “TUNER”.
2
To operate using the main remote control unit, set the
remote control unit to the TUNER (
) mode.
(vpage 51 “Remote Control Unit Operations”)
3
Press
[BAND]
to select “FM” or “AM”.
4
Tune in the desired broadcast station.
q
To tune in automatically (Auto Tuning)
Press [MODE] to light the “AUTO” indicator on the display, then use
[df] to select the station you want to hear.
w
To tune in manually (Manual Tuning)
Press [MODE] to turn off the display’s “AUTO” indicator, then use
[df] to select the station you want to hear.
Listening to FM/AM Broadcasts
•
It is also possible to switch to “FM” or “AM” in step 1 by pressing
[TUNER]
.
• If the desired station cannot be tuned in with auto tuning, tune it in
manually.
• When tuning in stations manually, press and hold [df] to change
frequencies continuously.
• The time for which the menus are displayed can be set at menu
“Manual Setup” – “Option Setup” – “On-Screen Display” (vpage
31, 32).
Basic Operation
Press
, then turn
to select the preset radio station.
Listening to Preset Stations
Operation on the Main Unit
Operation on the Main Remote Control Unit
1
Press
[A ~ G]
to select the memory block.
2
Press
[CHANNEL]
or
[1 ~ 8]
to select the desired preset
channel.
n
Default settings
Auto tuner presets
A1 ~ A8
87.5 / 89.1 / 98.1 / 107.9 / 90.1 / 90.1 / 90.1 /
90.1 MHz
B1 ~ B8
520 / 600 / 1000 / 1400 / 1500 / 1710 kHz,
90.1 / 90.1 MHz
C1 ~ C8
90.1 MHz
D1 ~ D8
90.1 MHz
E1 ~ E8
90.1 MHz
F1 ~ F8
90.1 MHz
G1 ~ G8
90.1 MHz
Playing Video and Audio Equipment
1
Prepare the equipment.
q
Load the DVD, CD or other software in the player.
(vSee the operating instructions of the respective devices.)
w
To play a video device, switch the monitor input.
(vSee the monitor’s operating instructions.)
2
To operate using the main remote control unit, set the
remote control unit to the AMP mode.
(vpage 51 “Remote Control Unit Operations”)
3
Use
SOURCE SELECT
to select the input source.
4
Start playback.
(vSee the operating instructions of the respective devices.)
Basic Operation
Get
ting Star
ted
Connections
Set
up
Pla
ybac
k
Remot
e Contr
ol
Multi-Zone
Inf
or
mation
Tr
oubleshooting
AVR2808CIEU.indd 47
2007/06/20 8:58:18