Denon AVR-2808CI - Manual (Page 59)

1 Press [MODE SELECTOR] for the device you want to
reset.
2 Press and hold in [RC SETUP] for at least 3 seconds.
The signal transmission indicator flashes twice.
3
Press [9] , [7] and [6] , in that order.
The signal transmission indicator flashes twice.
4 Press the button you want to reset twice.
The signal transmission indicator flashes twice.
Resetting the Main Remote Control Unit
Learning Function
G Resetting button by buttonH
1
Press [MODE SELECTOR] for the device you want to
reset.
2
Press and hold in [RC SETUP] for at least 3 seconds.
The signal transmission indicator flashes twice.
3 Press [9] , [7] and [6] , in that order.
The signal transmission indicator flashes twice.
4
Press [MODE SELECTOR] for the device you want to
reset twice.
The signal transmission indicator flashes twice.
G Resetting by device modeH
1
Press and hold in [RC SETUP] for at least 3 seconds.
The signal transmission indicator flashes twice.
2
Press [9] , [7] and [8] , in that order.
The signal transmission indicator flashes twice.
3 Press [SYSTEM CALL] ( 1 , 2 or 3 ) you want to reset.
4
Press and hold in [RC SETUP] for at least 3 seconds.
The signal transmission indicator flashes twice.
1 Press [MODE SELECTOR] for the device you want to
reset (TV or SAT/CBL).
2
Press and hold in [RC SETUP] for at least 3 seconds.
The signal transmission indicator flashes twice.
3
Press [9] , [8] and [4] , in that order.
The signal transmission indicator flashes twice.
4 Press and hold in [RC SETUP] for at least 3 seconds.
The signal transmission indicator flashes twice.
1
Press and hold in [RC SETUP] for at least 3 seconds.
The signal transmission indicator flashes twice.
2
Press [9] , [8] and [1] , in that order.
The signal transmission indicator flashes 4 times.
All the settings are restored to their defaults.
System call function
Punch-through function
All settings
Adjusting the Backlight’s Brightness
The display’s brightness can be adjusted in 5 steps.
(Default: Step 3)
1 Press and hold in [RC SETUP] for at least 3 seconds.
The signal transmission indicator flashes twice.
2 Press [CHANNEL +] or [CHANNEL –] .
The display gets one step brighter when [+] is pressed.
The display gets one step darker when [–] is pressed.
3 Press [RC SETUP] to complete the setting.
About the zone remote control
unit (RC-1071)
The sub remote control unit (RC-1071) included with the AVR-
2808CI can be used as the exclusive multi-zone remote control
unit.
b
The following describes operation for the selected zone. (Use
[ZONE SELECT] to switch zones.)
• Turning the multi-zone power on and off
• Selecting the input source to be played
• Adjusting and temporarily muting the multi-zone volume
• Listening to the tuner
• Operating an iPod (Note that [FAVORITES DIRECT PLAY] can only
be used with the ASD-3W/3N.)
Get
ting Star
ted
Connections
Set
up
Pla
ybac
k
Remot
e Contr
ol
Multi-Zone
Inf
or
mation
Tr
oubleshooting
[CHANNEL+ / –]
[POWER OFF]
[REPEAT]
[POWER ON]
[RANDOM]
[SHIFT]
[MUTE]
[VOLUME+ / –]
[FAVORITES
[ DIRECT PLAY]
[SOURCE SELECT]
[ZONE SELECT]
[TUNING+ / –]
[ 8 ],[ 9 ],
[ 1 / 3 ],[ 2 ]
ZONE SELECT Switching the zone to be operated
POWER OFF Power off
POWER ON Power on
SOURCE SELECT Switching the input zone
VOLUME + / - Volume control
CHANNEL + / - Channel + / –
TUNING + / - Tuning + / –
MUTE Muting
SHIFT Switching the memory block
8 9 Auto search (cue)
2 Stop
1 /3 Play / Pause
FAVORITES DIRECT PLAY Playing files registered at “FAVORITES”
REPEAT 1-track / All -track repeat play
RANDOM 1-track / album shuffle play
b When using a Control Dock for iPod (ASD-1R), [FAVORITES DIRECT
PLAY] cannot be used.
AVR2808CIEU.indd 59 2007/06/20 8:58:32