Denon AVR-2808CI User Manual
Page 52
• To cancel, press
until “ZONE2 SOURCE” is displayed.
• Make a test recording before starting the actual recording.
• Signals are only output to the analog REC OUT connectors when
the digital signals input to the digital input connectors (OPTICAL/
COAXIAL) are PCM (2-channel) signals.
• Digital audio signals input to the HDMI connectors are not output
to the REC OUT connectors, so connect using the OPTICAL or
COAXIAL connectors.
• Sources selected with the REC OUT mode are output from ZONE2
as well.
• In the REC OUT mode, the remote control unit’s ZONE2 mode
buttons cannot be operated.
• The “XM” digital audio output signals are not output from the
OPTICAL2 or OPTICAL3 output connectors.
NOTE
• Recordings you make are for your personal enjoyment and should
not be used for other purposes without permission of the copyright
holder.
• Input sources for which “Delete” is selected at “Source Delete”cannot
be selected.
Recording on an External Device
(REC OUT mode)
You can listen to one program source while recording a different
program source.
1
Press
.
“ZONE2 SOURCE” is shown on the display.
ZONE2 SOURCE
ZONE2 TUNER
ZONE2 XM
····
RECOUT XM
RECOUT TUNER
RECOUT SOURCE
······
2
Turn
until “RECOUT SOURCE”
is displayed.
The “
” indicator lights.
3
Turn
to choose the input source
to be recorded.
4
Play the program source.
For operating instructions, refer to the respective equipment’s
operating instructions.
To record FM or AM broadcasts, select the broadcast (vpage
44).
5
Start recording.
For operating instructions, refer to the respective equipment’s
operating instructions.
CH SELECT
SOURCE SELECT
QUICK SELECT
uiop
QUICK SELECT
uio p
CH SELECT
About the button names in these explanations
< > : Buttons on the main unit
[ ]
: Buttons on the remote control unit
Button name only:
Buttons on the main unit and remote control unit
Get
ting Star
ted
Connections
Set
up
Pla
ybac
k
Remot
e Contr
ol
Multi-Zone
Inf
or
mation
Tr
oubleshooting
AVR2808CIEU.indd 52
2007/06/20 8:58:24