Denon AVR-2808CI - Manual (Page 44)

f RESTORER
This function restores compressed audio signals to how they
were before compression and corrects the sense of volume of
the bass to obtain richer playback sound.
[Selectable items]
OFF
:
Do not use RESTORER.
Mode1 (RESTORER 64):
Optimized mode for compressed sources with very weak highs.
Mode2 (RESTORER 96):
Apply suitable bass and treble boost for all compressed sources.
Mode3 (RESTORER HQ):
Optimized mode for compressed sources with normal highs.
g Night Mode
Optimized setting for late-night listening.
Operating from the main remote control unit
Press the NGT button.
The “
” indicator lights when “Low”, “Middle” or “High” is
selected.
OFF Low Middle
High
[Selectable items]
OFF
: Turn night mode off.
LOW
: Turn late night mode on (Low setting).
MID
: Turn late night mode on (Mid setting).
HIGH
: Turn late night mode on (Hi setting).
h Audio Delay
Compensate for mismatched timing between video and audio.
• This cannot be adjusted when playing in the EXT. IN, DIRECT or
STEREO mode (with “Front Speaker” set to “Large”, “Tone Defeat”
to “ON” and “Room EQ” to “OFF”.)
• The adjustment range is 0 to 100 ms when the Auto Lipsync
Correction function is activated.
Operating from the main unit or main remote
control unit
b When set using the procedure below, the on-screen display is not
displayed. Adjust while watching the display.
q Press the AUDIO DELAY button on the main unit or the A. DL button
on the main remote control unit.
w Use the o p button to set.
Delay audio.
This sets the delay time for audio signals.
[Variable range] 0 ms ~ 200 ms
If you wish to adjust the “Audio Delay” while playing HDMI or
component video signals, press u to set “on-screen display” to “OFF”.
This way the audio delay can be adjusted while watching the picture.
(Press u again to switch to the on-screen display.)
Information
Status
Shows information about current settings.
F Menu screen F
2.Audio Input Signal
3.HDMI Information
4.Auto Surround Mode
5.Quick Select
6.Preset Station
1.Status
5.Information
a Main zone
Shows information about settings for main zone.
The items displayed differ according to the input source.
[Items to be checked]
Select Source Name Surround Mode Input Mode
Rec Select Video Select Source Level Room EQ
Night Mode RESTORER
etc.
s ZONE2 / ZONE3
Shows information about settings for multi-zone.
[Items to be checked]
Power Select Source Volume Level
Name :Record
Surround Mode:
STEREO
Select Source:
5-1.Status
PHONO
Input Mode :ANALOG
1/4
Get
ting Star
ted
Connections
Set
up
Pla
ybac
k
Remot
e Contr
ol
Multi-Zone
Inf
or
mation
Tr
oubleshooting
About the RESTORER function
• Such compressed audio formats as MP3, WMA (Windows Media
Audio) and MPEG-4 AAC reduce the amount of data by eliminating
signal components that are hard for the human ear to hear. The
RESTORER function generates the signals eliminated upon
compression, restoring the sound to conditions near those of the
original sound before compression. It also corrects the sense of
volume of the bass to obtain richer sound with compressed audio
signals.
• This is displayed on the menu and can be set when the input source
is selected to “XM”, or analog signals (including AM/FM signals) or
PCM signals (fs = 44.1/48 kHz) are input.
Operating from the main unit or main remote
control unit
During playback, press the RESTORER button on the main unit or the
RSTR button on the main remote control unit.
When set to something other than “OFF”, “
” is displayed.
OFF Mode 1 Mode 2
Mode 3
The default setting for “iPod” is “Mode3”. All others are set to “OFF”.
(RESTORER 64) (RESTORER 96)
(RESTORER HQ)
AVR2808CIEU.indd 44 2007/06/20 8:58:15