Denon AVR-2808CI - Manual (Page 46)

MASTER VOLUME
SOURCE SELECT
SPEAKER
Playback
About the button names in these explanations
< > : Buttons on the main unit
[ ] : Buttons on the remote control unit
Button name only:
Buttons on the main unit and remote control unit
Preparations
1
Press .
The power indicator lights red and the power is set to the standby
mode.
2
Press or [POWER ON].
The power indicator flashes green and the power turns on.
To operate the AVR-2808CI using the main remote control unit, set the
remote control unit to the AMP mode
(vpage 51 “Remote Control
Unit Operations”) .
Turning the Power Off
q Press or [POWER OFF].
The power is set to the standby mode.
w Press .
The power indicator turns off, and so does the power.
NOTE
Power continues to be supplied to some of the circuitry even when
the power is in the standby mode. When leaving home for long periods
of time or when traveling, either press to turn off the power,
or unplug the power cord from the power outlet.
Turning the Power On
Either turn or press [MASTER
VOLUME] .
Operations During Playback
Adjusting the Master Volume
Press [MUTE] .
To cancel, press [MUTE] again. Muting can also be canceled by adjusting
the master volume.
Plug the headphones into .
The sound from the speakers and pre-out connectors is automatically
cut.
NOTE
Be careful not to set the volume too high when using headphones.
Turning Off the Sound Temporarily (Muting)
Listening with Headphones
To operate the AVR-2808CI using the main remote control unit, set the
remote control unit to the AMP mode
(vpage 51 “Remote Control
Unit Operations”) .
Selecting the input source
Operation on the main unit
Turn .
If “Rec Select” or “Video Select” is selected for the input source,
press before turning .
Operation on the main remote control unit
Press [SOURCE SELECT] .
The desired input source can be selected directly.
[TUNER]
SOURCE
SELECT
[POWER ON]
[MUTE]
[POWER OFF]
MASTER
VOLUME
SPEAKER
[ AMP]
[ TU]
[BAND]
[A ~ G]
[MODE]
[MEMO]
[d f]
[1 ~ 8]
[SHIFT]
[CHANNEL]
Get
ting Star
ted
Connections
Set
up
Pla
ybac
k
Remot
e Contr
ol
Multi-Zone
Inf
or
mation
Tr
oubleshooting
Press SPEAKER .
Front A Front B
Front A+B
Switching the front speakers
( mode)
AVR2808CIEU.indd 46 2007/06/20 8:58:18