KBC Networks MPEG4 Decoder - Manual (Page 17)

Decoder User Manual
Manual-MPEG4_DECA-Rev1206
Copyright © KBC Networks 2011
Page 17 of 29 www.kbcnetworks.com
the new configurations once the OSD items or default TV type have been applied
and the decoder has completed the save/reboot process.
3.2.1.3 Date Format
Select the format for the time and date stamp if “Date Time” is selected as an OSD
item.
Note: Click on “Apply” in this section of the web browser GUI to apply changes to the
Date Format, OSD Items and/or Default TV Type.
3.2.1.1 Audio Volume Setting – Audio In Gain
Select ON to increase audio signal, default is OFF.
3.2.1.2 Audio Volume Setting – Audio Out Volume
Adjust the volume level out of the decoder.
3.2.2 WAN Setting
The WAN Setting is where the network properties of the encoder are configured.
Keep a record of changes or use the IP Utility to find the IP addresses if changed
from default configurations.
3.2.2.1 Dynamic IP Address
When selected the IP address of the decoder will be set automatically provided that
the decoder is connected to a DHCP router.