KBC Networks MPEG4 Decoder - Manual (Page 15)

Decoder User Manual
Manual-MPEG4_DECA-Rev1206
Copyright © KBC Networks 2011
Page 15 of 29 www.kbcnetworks.com
3.2.1 Host Setting
The Host Settings are the general configurations of the encoder used for
identification and network association.
3.2.1.1 Host Name
Enter a host name for the decoder and it will be identified when the IP Utility is
used. The host name can be anything that will help to determine the camera when
the need to bring up the video or make configuration changes arises. Clicking reset
will clear the text from the host name section.
3.2.1.2 Language
See section 3.1.2.1 for language options. It is in this section where the selected
language will remain even after logging out.
Note: If the parameters of sections 3.3.2.1 and 3.3.2.2 have been changed from
default, you must click “Apply” to save those changes. The encoder must also
go through a reboot process by clicking on “>>Save Reboot” from the menu on
the left of the web browser.