Dataman 848Pro2 - Manual (Page 44)

44
Because work with remote desktop is similar to working on local station, please
continue to read chapter “Local administration”.
Local administration
For local administration of Stand-Alone programmer you must have connected
standard PS/2 keyboard, PS/2 mouse, and standard analog display with resolution
minimal 1024x768 and 32bit color supported.
Operating disk is divided to three volumes. First volume named as “System” (C:)
contains Windows Embedded 8.1 Industrial Pro operating system
Warning: Do not delete, change files or perform any writes on “System” disk volume.
Second volume is “Reserved” (D:).
Third volume is named as “Data” (E:). This volume contains Programmer, Projects,
Logs, Updates and Temp directories.
Programmer is directory, where main control software is installed. In directory Logs are
saved log files from operations with devices. When OS update files are available, they
should be saved to Updates directory. Your project files should be in Projects
directory. Exact update steps will be distributed with operating system updates.
For programmer reliability operating system is configured with write filters on
“System” disk. As a side effect of these filters, any operating system configuration
changes (except of user desktop and time zone) will be wasted after restart or
shutdown programmer.
How to make changes in system permanent
If you want persistently save changes on your DATAMAN-848PRO2 follow these steps:
1. login as admin
2. run "uwfmgr.exe filter disable" (needed admin rights if you are login as operator, for
example with "runas" command from operator account, or login as admin).
3. perform restart DATAMAN-848PRO2 system.
4. login as admin
5. make desired changes in your DATAMAN-848PRO2 system.
6. run "uwfmgr.exe filter enable", and restart DATAMAN-848PRO2 immediate. Now
should be changes permanent (until system recovery will be performed).