Dataman 848Pro2 - Manual (Page 17)

17
count-down mode
Buffer operations
view/edit, find/replace
fill/copy, move, byte swap, word/dword split
checksum (byte, word)
print
File load/save
no download time because programmer is PC controlled
automatic file type identification/recognition
Supported file formats
unformatted (raw) binary
HEX: Intel, Intel EXT, Motorola S-record, MOS, Exormax, Tektronix, ASCII-SPACE-
HEX, ASCII HEX
Altera POF, JEDEC (ver. 3.0.A), e.g. from ABEL, CUPL, PALASM, TANGO PLD,
OrCAD PLD, PLD Designer ISDATA, etc.
JAM (JEDEC STAPL Format), JBC (Jam STAPL Byte Code), STAPL (STAPL File)
JEDEC standard JESD-71
VME (ispVME file VME2.0/VME3.0)
GENERAL
operating voltage AC 90-264V, 47-63Hz
power consumption max. 300W active
dimensions 625x465x115 mm (24.6x18.3x4.5 inch)
weight (programmer) 14.9kg (32.85 lbs)
temperature 5°C ÷ 35°C (41°F ÷ 95°F)
humidity 20%..80%, non condensing
Package included
Standard accessories
DATAMAN-848PRO2 programmer
diagnostic POD for ZIF socket selftest of the programmer (1x)
diagnostic POD for ISP connector selftest of the programmer (1x)
ISP cable (8x)
anti-dust cover for ZIF socket (8x)
user manual
software
registration card
calibration test report
transport case
Bonus pack:
ESD wrist strap with cord and banana plug
Vacuum pen
Additional services
free technical support (phone/fax/e-mail).
free lifetime software update via Web site.