Dataman 848Pro2 - Manual (Page 42)

42
Welcome screen is displayed on standalone's build-in LCD screen after successful
starting of standalone control software. The screen can be also displayed by using
menu command 'Help / About'. Welcome screen contains following basic information:
version of control software
programmer type
number of Sites available
operating system
information about processor and size of installed RAM memory
computer name and IP address
system date and time
Welcome screen can be closed by clicking on button OK.
Administration of build in PC
Introduction
DATAMAN-848PRO2 Stand-Alone multiprogramming system is powerful
programmer equipped with Windows Embedded 8.1 Industry Pro operating system
(“OS”). There are two major kinds of administration of the OS – network and local.
OS is configured with two users accounts
admin
operator.
Credentials for DATAMAN-848PRO2 Stand-Alone multiprogramming system users are:
Login Password
Administrator admin saadmin
Operator operator saoperator
Network administration
Connecting to network
OS in programmer is configured for operating with TCP/IP network. To obtain correct IP
address, the configured DHCP server must run in your local network, when programmer
is starting. After programmer is started it will show Welcome screen. On bottom part of
screen in line “IP address:” is the address obtained from DHCP server. Same
information you may find on About screen. When IP address is equal to 127.0.0.1, then
no network cable is connected, DHCP server is not running when device start or other
kinds of error occur – refer to troubleshooting chapter.