beautypg.com

d&b D12 Software User Manual

Page 26

background image

SysErr
A numerical value indicating the number of times the D12 has entered
the error condition "SysErr".

RemoteErr
A numerical value indicating the number of times the D12 has entered
the error condition "RemoteErr".

DSP Halt
A numerical value indicating the number of times the D12 has entered
the error condition "DSP Halt" due to an internal fault.

PS Log

Log Power Supply

Back
PS Err

1x

Overvolt. 0x
Temp Off 0x
<40°C
. . .

PS Log

Selecting "PS Log" and pressing the encoder enters the submenu.

PS Err
A numerical value indicating the number of times the D12 has entered
the error condition "PS Err".

Overvolt.
A numerical value indicating the number of times the D12 has entered
the error condition "Overvoltage".

Temp Off
A numerical value indicating the number of times the D12 has switched
off with the error condition "Overtemperature" due to overheating.

Temp. (Temperature Log)
Proportionate temperature ranges.
They display the proportion of "On Time" the D12 has been operated
within the temperature ranges listed.

Channel A

Channel B

Log Amp. Channel

A

Back
Mute
ISP
. . .

Channel A (B)

Selecting

"Channel A (B)" and pressing the encoder enters the submenu.

Mute
Proportion of the "On Time" the D12 was muted.

ISP
Proportion of the "On Time" an input signal was present at the D12.

GainRed
Proportion of the "On Time" the D12 has been operated with gain
reduction.

Overload
Proportion of the "On Time" the D12 has been operated with too high
input level or output current.

Amp Prot
A numerical value indicating the number of times the D12 has entered
the error condition "Amp Protect", possibly due to a current overload
caused by a low impedance or short circuit connected to the output.

Amp Err
A numerical value indicating the number of times the D12 has entered
the error condition "Amp Error" due to an internal fault.

Temp Off
A numerical value indicating the number of times the D12 has switched
off with the error condition "Overtemperature" due to overheating.

D12 Software manual (Firmware V2.x.x)

(5.5 EN)

Page 26 of 36