Relay (high voltage) – CUE ipCUE User Manual
Page 29
7.14. RELAY (High Voltage)
This port provides one isolated high voltage relay. Normally Close and Normally Open contacts as well as
Common contact of each relay can be used. The Normally Close position is the state of the relay when it is not
turned on (energized). Each relay contact closure is rated max. 230 V, max. 10 A for resistive loads. Max. 400
W per relay can be switched for inductive or capacitive loads. Terminals 1.5 mm
2
are used.
Relay output is applicable as follows
•
RELAY 1 – 8 for ipCUE-sigma
and not applicable for ipCUE-alpha, ipCUE-beta, ipCUE-gamma, ipCUE-delta, ipCUE-epsilon.
Connector pin out
Note: NC-C-NO description
User Manual ipCUE Controllers
Page 29 of 52
RELAY
Pin
NC
C
NO
3-pin screw -type terminals
Description
Relay Contact Common
Relay Contact Normal Close
Relay Contact Normal Open
NC
C
NO
Close RELAY inside ipCUE
Open RELAY inside ipCUE
NC
C
NO