Connection, Cuenet (lan) – CUE ipCUE User Manual
Page 16
7. Connection
7.1.
CUEnet (LAN)
The CUEnet is a standard network connection 10/100 BaseT LAN using RJ-45 connector. There is no auto
sense, which means it does not recognize straight through cable to cross-over cable. For the direct PC
connection it is necessary to use cross-over cable; for the connection to Ethernet switch straight through cable.
The length of the Ethernet cable connecting ipCUE controller to the network must not exceed 100 meters.
Connector pin out
Pin
1
2
3
4
Signal
TX_D1+
TX_D1-
RX_D2+
Description
5
6
7
8
RX-D2-
G
G
Ground
Ground
Cat5 Cable Color
White / Orange
Orange
White / Green
Blue
White / Blue
Green
White / Brown
Brown
RJ-45
1
8
CUEnet (LAN)
User Manual ipCUE Controllers
Page 16 of 52