Dukane 8808 - Manual (Page 52)

42
8. Press the ENTER button.
4. Convenient Features
10 . Press the SELECT ̇ or ̈ button to highlight the [OK] and press the ENTER button.
This completes the Cornerstone correction.
Selecting [Cancel] will return to the adjustment screen without saving changes (Step 3).
Selecting [Reset] will return to the factory default.
Selecting [Undo] will exit without saving changes.
NOTE: To reset the 3D Reform correction setting values, press and hold the 3D REFORM button for a minimum of 2 seconds.
NOTE: During 3D Reform adjustment, [Aspect Ratio] and [Screen] may not be available. Should this happen, first reset the 3D
Reform data and then do each setting. Second repeat the 3D Reform adjustment. Changing [Aspect Ratio] and/or [Screen] setting
can limit [3D Reform] in its adjustable range.
Screen
9. Use the SELECT
̆̄̇̈
button to select another icon which points in the direction.
On the Cornerstone adjustment screen, select [Exit] or press the EXIT button on the remote control.
The confirmation screen is displayed.
7. Use the SELECT ̆̄̇̈ button to move the projected image frame as shown on the example.
Screen
Screen