Dukane 8808 - Manual (Page 161)

19
Setting the LAN Setting of Projector
5. Setting the LAN Setting of Projector
5
9 Select SSID from “Site Survey” (if necessary).
A list of SSID that can be connected to wireless LAN in this place are displayed, and the SSID that are
to be connected are selected from this list. When SSID is selected from the list, the “SSID” field,
“Mode” field and “Channel” field will also be automatically set.
<1> Press the SELECT ̄ button once to highlight “Site Survey” and press the button.
Searching SSID will begin.
When searching SSID is complete, a list of SSID is displayed.
Icon
............ Access point ............ Personal computer (Ad Hoc)
........... WEP setting
<2> Use the SELECT ̄/̆ button to highlight the SSID of the network to be connected.
Press the button once to highlight [OK] and press the button.
If the SSID to be connected is not on the list, press the EXIT button.
Note
To connect SSID for which WEP is set, the same setting must be made on the projector
(
page 21).
10 Input or edit “SSID” (if necessary).
SSID selected in “Site Survey” are automatically input.
If the highlight is moved to the “SSID” field and the
button is pressed, a software keyboard is
displayed and characters can be input or edited.
The default setting of the projectors is “NECPJ”.