Dukane 8808 - Manual (Page 153)

11
4. Attaching Wireless LAN Card
Attaching W
ireless LAN Card
4
4. Attaching Wireless LAN Card
Insert the wireless LAN card into the PC card slot on the rear panel of the projector.
Important
• The wireless LAN card must be inserted into the PC card slot in the correct direction. It
cannot be inserted in the reverse direction. If the card is inserted in the reverse direction
with excessive force applied, the pins in the projector and the PC card slot may break. Be
sure to insert the wireless LAN card with its label facing up.
• Before touching the LAN card, touch a metallic object (such as a door knob or aluminum
window frame) to discharge the static electricity from your body.
■ Setting card in PC card slot
1 Press POWER
ON/STAND BY
button to set the projector to Stand-by mode,
press the “O (off)” side of the main power switch of the projector.
2 With the label on the wireless LAN card facing up, slowly insert the card into
the slot horizontally.
PC C ARD COMPONENT IN
USB
LAN
AUDIO IN COM PUTER 3 IN
COM PUTER 1 IN
COM PUTER 2 IN
PC C ONT ROL
MONITOR OUT
AUDIO OUT
Cb/P b
L/M ONO
R
Y
Cr/P r
S-VIDEO IN
VIDEO IN
AUD IO IN
AC I N
PC CARD LAMP STATUS POWER
ON/S TAN D B Y
SOU RCE
AUT O A DJU ST
3D R EFO RM
Note
Do not apply any excessive force while inserting the card.
• Always insert or remove the wireless LAN card when the main power is turned off. Failure to do so may cause projector
malfunction or damage to wireless LAN card. If the projector will not work correctly, turn off the projector, wait 30 seconds,
and turn it back on.