CONTA-CLIP SMS-MULTI I/O - Manual (Page 5)

SMS-MULTI-IO
- 4 -
1 1 1 1
Des
Des Des Descr cr cr crip ip ip iption tion tion tion
1.1 1.1 1.1 1.1
Summary
Summary Summary Summary
The SMS-MULTI-IO is a compact remote control and messaging system. All IO’s of the module are
monitored and controlled by SMS communication through the GSM network.
The module can be configured with the SMS-MULTI-IO PC software. Each IO can be modified by user-
defined parameter names and messages. A selected group of (max. 5) users can be chosen from the
phonebook to control the module.
The SMS-MULTI-IO features:
• 4 Digital Outputs (DO), relay outputs 2x CO contact, 2x NO contact 250V/8A
•
2 Analog outputs (AO), 0...10V DC
•
8 Universal Inputs (UI) which can be set by software as:
•
Analog Input (AI), 0..10V or 0(4)..20mA
• Digital Input (DI)
• Resistive Temperature Device (RTD), Ni1000, PT1000 or PT100
On each defined input status change (rising or falling flank for Digital Inputs or reached level for
analog or RTD inputs) the module sends a pre- or user-defined message to the selected group of
users.
The outputs can be set when a selected user sends a pre- or user-defined SMS to the SMS-MULTI-IO.
The SMS-MULTI-IO can send a periodical SMS on user defined times, or when the module comes back
from a power reset.
1.2 1.2 1.2 1.2
Safety instructions
Safety instructions Safety instructions Safety instructions
• This device is NOT suitable for monitoring sensible or time critical processes. Power
interruption or GSM network failures do not guarantee flawless monitoring.
•
Keep ESD precautions in mind when opening the module.