CONTA-CLIP SMS-MULTI I/O - Manual (Page 27)

SMS-MULTI-IO
- 26 -
5.4.2 5.4.2 5.4.2 5.4.2 Reading
Reading Reading Reading from from from from a aa an n n n analog input analog input analog input analog input
To retrieve the status of an analog input, send: rrrrui ui ui uin , where n is the number of the requested input.
The module answers: ‘status AIn=xxxx’
When a user defined name is given to an input it can be addressed by putting the name between
asterisks. E.g. an output is called ‘watertank’ you read the status by sending
r* r* r* r*watertank**** . The
module answers: ‘status watertank=xxxx’
NOTE: To receive a user defined confirmation message from a non user defined input name the user
has to read the input by sending:
r* r* r* r*ain ain ain ain**** .
5.5 5.5 5.5 5.5
Digital Input
Digital Input Digital Input Digital Inputssss
5.5.1 5.5.1 5.5.1 5.5.1 Configuration
Configuration Configuration Configuration
The following items can be configured with the software:
•
Name, this name must be unique and can not be used with any other input or output.
Default set as DI1 to DI8.
• The Digital Inputs can generate messages when:
• A rising flank is detected: the status changes from 0 to 1
•
A falling flank is detected: the status changes from 1 to 0