Casella CEL Microtherm WBGT heat stress monitor - Manual (Page 43)

Additional Displayed Information
Battery voltage,
Charger circuit status,
Memory status,
Number of runs saved,
Firmware version,
User name and details.
Data Logger
Internal memory: 512 k RAM (with back-up battery) that
provides space for over 49 000 intervals,
so that when all five temperature and
humidity parameters are enabled, a total
of 245 000 individual results can be saved.
Logger Interval: Adjustable from 30 seconds to 60 minutes.
Recorded Values: Measured levels for the logging interval.
Maximum, minimum and average values
for the entire logging period are saved at
the end of each logging run.
Serial Interface: RS232 up to 38,400 baud.
Infrared Interface (Future expansion).
Alarm output: +5 V DC when the alarm is activated,
0 V while the alarm is inactive.
5.2 WinHSM, PC Based Application Software
Provides a friendly graphical interface for instrument configuration, data
download and graphical report presentation.
Operating System M.S. Windows™ 95/98/ME/2000 and
NT compatible,
Pentium II or better processor,
200 MHz recommended for real time
mode,
Requires 1.44 MB 3 1 /
2
" floppy disk drive,
RS232 serial port,
16 MB RAM, FDD and HDD,
Super VGA colour graphics.
5.3 Spare Parts
107039A Spare Wicks (pack of 10).
Page 43 of 44
Specification MICROTHERM Heat Stress WBGT &
WinHSM Application Software - User Manual