Casella CEL Microtherm WBGT heat stress monitor User Manual
Page 19
The instrument has an internal real-time clock, which should be set
to the current time and date.
When data is being logged, the measured temperatures and
calculated parameters will be recorded against the current date and
time.
However, when the instrument is configured by the WinHSM
software, the time and date on the internal clock are set
automatically to the PC's time and date. Please refer to Chapter 3 for
details.
10.
Press
to display the Set Clock screen.
11.
Use
or
to select a time or date field to be edited and
or
to edit the entry in the selected field.
12.
Use
or
to select other fields and
or
to edit the entries.
13.
When all entries on the Set Clock screen are correct, press
to
accept the settings and return to the Time & Date screen.
14.
Specify the serial communication details by pressing
while
highlighting the Serial Comm's option on the Configuration menu.
The Serial Comms screen is displayed, where the only setable
parameter is Baud Rate.
15.
Use
or
to edit the entry in the Baud Rate field.
Enter
Fri Ø1 /
/ 2ØØØ
Dec
14: 59: 26
MTH1
9
Set Clock
Enter
Enter
S e r i a l C o m m s
B a u d R a t e :
9 6 Ø Ø
D a t a B i t s
:
8
S t o p B i t s
:
1
P a r i t y
:
N o n e
MTH1
6
Page 19 of 44
Operation
MICROTHERM Heat Stress WBGT &
WinHSM Application Software - User Manual