Casella CEL Microtherm WBGT heat stress monitor - Manual (Page 22)

This graph scrolls across the screen from right to left as samples are
collected, with the current parameter and value identified.
4. Press to change the displayed parameter on the graph.
The options are:
Ta,
WBGT out,
WBGT in,
Dewpoint,
Relative Humidity,
Tg,
Tnw.
5. Press to change the time base between: 15, 30, 60, 120 minutes.
6. Press or again to return to the measurement display.
2.5 Data Logging
2.5.1 Configuring the Logger
Before storing data, the logger should be configured for the proposed
measurements.
1.
Display the Logger screen by selecting the Logger option from the
Main Menu.
2. From the Logger screen, select and display the Config Logger screen.
3. Select logger Intervals.
30
15 min
20
Ta = 2 4 . Ø c o
o c
MTH0
3
Battery icon that empties as
power is drained
Current parameter value
C o n f i g L o g g e r
I n t e r v a l s : M i n 1
S t o p W h e n f u l l
C l e a r M e m o r y : N o
L o g T i m e :
M o d e : Ø 3 4 , Ø 3 : 1 2 : Ø Ø
MT
H10
Logging time available
(depends upon the intervals
set and the amount of free
memory space).
The time is shown as:
"ddd,hh:mm:ss"
Page 22 of 44
Operation MICROTHERM Heat Stress WBGT &
WinHSM Application Software - User Manual