Casella CEL Microtherm WBGT heat stress monitor - Manual (Page 28)

3.2 Starting WinHSM Application Software
Start the WinHSM application software by double clicking on its desktop
icon, or selecting it from the Start Menu. The top level window will be
displayed.
As the cursor is moved to each menu button, the relevant function will be
displayed on the message line at the bottom left of the display. If this is the
first time that you open the newly installed software, a dialog will be
displayed telling you that no profile has been defined and asking you to
create and select one before proceeding. Your only option is to click OK ,
which displays the Active Profile dialog, (see Section 3.3.1).
3.3 Profiles
Profiles are used to identify the unique operating parameters of each
instrument or measurement application.
In situations where multiple instruments are interrogated by one PC, the use
of profiles provides a convenient way of identifying and managing data from
each instrument.
Profiles are stored in the PC.
3.3.1 Creating/Editing a Profile
1. Create a new profile by selecting the Profiles... option on the Edit
menu, or by clicking .
You will be presented with the Active Profile dialog where the active
profile is highlighted.
2. Select the name of a profile to edit or press New as appropriate.
3. For a new profile, enter a suitable name in the Profile Name dialog.
Four tab Properties dialogs define the basic features of the profile.
The ID dialog specifies the instrument identity and selects a pre-
drawn 128 wide by 64 high, black and white bitmap ( .bmp ) for use
as a welcome screen
4. Make suitable entries in the fields.
In addition to normal alpha-numeric characters, the following may
also be used in the messages, " + - : ( ) + - # and SPACE".
The Communications dialog configures the RS 232 serial interface
and specifies Modem details.
Page 28 of 44
Application
Software MICROTHERM Heat Stress WBGT &
WinHSM Application Software - User Manual