Casella CEL Microtherm WBGT heat stress monitor - Manual (Page 27)

3. WinHSM APPLICATION SOFTWARE
WinHSM Application Software supports the data logger facilities offered by
the Microtherm Heat Stress WBGT. It is specifically written by Casella CEL to
simplify the process of instrument configuration, downloading and data
presentation.
The application, supplied on three 1.44 MB 3
1 / 2 " floppy disks, is designed to
operate within the 32 bit environment of Windows 95 and later or Windows
NT 4 and later.
The instrument communicates with the PC using an RS 232 serial port.
3.1 Installation on Windows 95™, 98™, ME™,
Windows NT™ & Windows 2000™
System Requirements:
IBM TM compatible PC with Pentium II or better processor ,
At least 16 MB of free RAM space,
Microsoft Windows 95/98, Windows NT,
Hard drive with at least 4 MB of free space,
RS 232 Serial Communication Port,
3 1 /
2
" high density (1.44 MB) floppy disk drive for program installation,
Super VGA colour monitor,
Printer - optional.
Before installation, it is recommended that a back-up copy be made of the
program disks. Keep the originals in a safe place and use the copy to install
the software. The Setup program for WinHSM will install files in the specified
Program directory and also in the Windows\System directory.
1.
Start Windows.
2. Insert WinHSM Disk 1 into the floppy disk drive.
3. Select Start from the task bar, then Run…
4. Type a:\setup , where "a" identifies the floppy disk drive, then press
Enter .
5. Wait for the Casella CEL welcome screen to be displayed, then
follow the on-screen instructions.
Once installation is complete, a WinHSM icon will
be found on your Windows desktop.
Page 27 of 44
Application
Software
MICROTHERM Heat Stress WBGT &
WinHSM Application Software - User Manual