BINDER KBF 115 - Manual (Page 81)

KBF / KBF P (E5.3) 09/2014 page 81/110
15.9.2 Mounting the wastewater can
(1) Fixing (if required)
Hang the can with its holding device on its 4 carriers at the free space next to the freshwater can.
(2) Hose connections
Plug the wastewater hose to the hose connection (23) of the can and secure it with a hose clamp.
You can use a part of the standard supplied water hose.
Wastewater hose connection (23)
Figure 32: Wastewater can (option)
Plug the free hose edge to the wastewater connection “OUT” (17) at the rear of the unit and secure
it with a hose clamp.
You can remove the wastewater can with its holding device for emptying (disconnect the hose first before
emptying).
CAUTION
Overflow of the wastewater can.
Damage to the surrounding.

Empty the wastewater can in a timely manner before it is full.
Bringing a source of humidity into the inner chamber may increase wastewater production.
Regularly check the filling level of the wastewater can.