BINDER KBF 115 - Manual (Page 12)

KBF / KBF P (E5.3) 09/2014 page 12/110
Figure 3: Position of labels on the unit rear
Keep safety labels complete and legible.
Replace safety labels that are no longer legible. Contact BINDER Service for these replacements.
1.4 Type plate
Position of type plate: left unit side (seen from front), at the bottom right-hand.
Figure 4: Type plate (example of KBF 240 regular unit 9020-0269)
Indications on the type plate (example) Information
BINDER
Manufacturer: BINDER GmbH
KBF 240 Model designation
Constant climate chamber Device name
Serial No. 00-00000 Serial no. of the unit
Built 2014 Year of construction
Nominal temperature 70 °C / 158 °F Nominal temperature
Enclosure protection IP 20 IP type of protection acc. to EN 60529
Temp. safety device DIN 12880 Temperature safety device acc. to standard DIN 12880
Class 3.1 Class of temperature safety device
Art. No. 9020-0269 Art. no. of the unit
Project No. --- Optional: Special application acc. to project no.
2,10 kW Nominal power
200-240 V 1 N ~ Nominal voltage +/-10%, phase indication
9,5 A Nominal current
Nominal temperature 70 °C 2,10 kW Max. operating pressure 15 bar
158°F 200-240 V 1 N ~ R 134A – 0,17 kg
Enclosure protection
Temp. safety device
IP 20
DIN 12880
9,5 A
50/60 Hz
Contains fluorinated greenhouse gases
covered by the Kyoto Protocol
Class 3.1
Art. No. 9020-0269 US PATS 4585923 / 5222612 / 5309981
Project No.
Built 2014
5405194 / 5601143 / 5773287 / 6079403
Constant climate chamber
D 78532 Tuttlingen / Germany
Tel. + 49 (0) 7462/ 2005-0
Internet: www.binder-world.com
KBF 240 Serial No. 00-00000
E5.3
Made in Germany