BINDER KBF 115 - Manual (Page 47)

KBF / KBF P (E5.3) 09/2014 page 47/110
A
program table will appear, which is initially empty until you enter the temperature values. You can now
enter the temperature program.
Temperature at the
beginning of the
program section
Fan speed in %
Factory setting:
50% in Idle Mode
100% in Manual Mode and
Program Mode
Program No. Subprogram TP-Program No. 1
Total number of program
sections
Parameter set (preselected)
Tolerance band limits tem-
perature (maximum and mini-
mum temperature)
Number of duplicates in case
of repeat cycles
Operation lines
(no function)
Duration of program
section
Number of start section in case
of repeat cycles
You can enter Program sections into this program table.
Hit the “PGM” button. An inquiry display appears allowing you to enter or delete individual program sec-
tions.
ZP-Abschnitt Abs. Nr. 5
insert
delete
In this view, new program lines can be entered or deleted:
new New lines are added below in the table
insert New lines are added above a previously selected line
delete Individual lines that have been selected previously are deleted
Create as many lines, i.e. program sections, as desired. As a next step, values can be entered into these
lines. It is possible to add supplementary lines later or to delete individual lines at any time.
To enter values, select the corre-
sponding line via the arrow keys.
Hit the “ENTER” button. The
pro-
gram editor appears.
PGM
4 x
PGM
08:43:55 15.12.13
08:43:55 15.12.13