Altera NCO MegaCore Function - Manual (Page 32)

The following directories contain separate top-level design files (named multichannel_example.v and
multichannel_example.vhd ) for Verilog HDL and VHDL in the directories:
\nco\example_designs\multi_channel\verilog
\nco\example_designs\multi_channel\vhdl
NCO Design Example Specification
The NCO meets the following specifications:
• SFDR: 110 dB
• Output Sample Rate: 200 MSPS (50 MSPS per channel)
• Output Frequency: 5MHz, 2MHz, 1MHz, 500KHz
• Output Phase: 0, π/4, π/2, π
• Frequency Resolution: 0.047 Hz
• Clock rate = 200MHz clock rate
• Number of channels = 4.
• Output sample-rate = f
clk
/4.
• Maximum output clock frequency = 50MHz.
The output signal has only one sample for a cycle.
Figure 4-2: Multi-Channel NCO Output SignalsShows the timing relationship between Avalon-ST
signals, a generated multiplexed signal stream and demultiplexed signal streams
clk
valid
startofpacket
endofpacket
sin_o
sin_ch0
sin_ch1
sin_ch2
sin_ch3
A0 B0 C0 D0 A1 B1 C1 D1 A2 B2 C2 D2
A0
B0
C0
D0
A1
B1
C1
D1
Design Example Parameters
4-2 NCO Design Example Specification
UG-NCO
2014.12.15
Altera Corporation NCO Multichannel Design Example
Send Feedback