Max 10 power management overview, Max 10 power management overview -1 – Altera MAX 10 Power User Manual
Page 3
MAX 10 Power Management Overview
1
2015.02.09
UG-M10PWR
MAX
®
10 devices offer the following power supply device options:
• Single-supply device—requires 1 external power supply of 3.0 V or 3.3 V whilst offering maximum
convenience and board simplicity.
• Dual-supply device—requires 2 external power supplies of 1.2 V and 2.5 V whilst offering the most
features, highest performance, and when coupled with high-efficiency Enpirion
®
PowerSoCs, the
lowest power solution.
Related Information
MAX 10 Power Management Features and Architecture
on page 2-1
Provides information about power management features and architecture
©
2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, ENPIRION, MAX, MEGACORE, NIOS, QUARTUS and STRATIX words and logos are
trademarks of Altera Corporation and registered in the U.S. Patent and Trademark Office and in other countries. All other words and logos identified as
trademarks or service marks are the property of their respective holders as described at
www.altera.com/common/legal.html
. Altera warrants performance
of its semiconductor products to current specifications in accordance with Altera's standard warranty, but reserves the right to make changes to any
products and services at any time without notice. Altera assumes no responsibility or liability arising out of the application or use of any information,
product, or service described herein except as expressly agreed to in writing by Altera. Altera customers are advised to obtain the latest version of device
specifications before relying on any published information and before placing orders for products or services.
www.altera.com
101 Innovation Drive, San Jose, CA 95134