Pilz PSSu E PS-P 5V - Manual (Page 21)

Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]
5-5
5.3 Inserting and removing an electronic module
5 Installation
5.3.2 Removing an electronic module
Removing an electronic module 5- ][Elektronikmodul ziehen
Procedure:
 Press the locking mechanisms [1] together simultaneously.
 Pull out the electronic module [2].
Schematic representation:
5.3.3 Changing an electronic module during operation
Changing an electronic module during operation 5- ][Montage Hot Swapping Netzteil
It is possible to change an electronic module during operation.
CAUTION!
Sparking can cause interference and errors!
Only change the module when the load is switched off!
[1]
[2]
[1]