Pilz PSSu E PD1 - Manual (Page 13)

Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]
3-1
3.1 Intended Use
3 Safety
3 3000 Safety Safety 3- 3.1 Intended Use 3100 Intended Use 3- ][Gertebeschreibung PD1
The module may be used to feed and extract external supplies to and
from the connection terminals.
Bestimm_Verwend_Zusatz-(T)
The module PSSu E PD1-T is suitable for use where there are increased
environmental requirements (see Technical Details).
Bestimmung/Gertebeschreibung_Ausschluss
Intended use includes making the electrical installation EMC-compliant.
Please refer to the guidelines stated in the "PSSuniversal Installation
Manual". The module is designed for use in an industrial environment. It
is not suitable for use in a domestic environment, as this can lead to in-
terference.
The following is deemed improper use in particular:
 Any component, technical or electrical modification to the module
 Use of the module outside the areas described in this manual
 Use of the module outside the technical details (see chapter entitled
"Technical Details")
Bestimm_Verwend_Info_PSSu_ab_1.4.0_PAS4000_ab_1.1.1
Bestimm_Verwend_Basismodule
The PSSu E PD1 module may be used in conjunction with the following
base modules:
][BA_Basismodule Digital breit  PSSu BP 2/16S
 PSSu BP 2/16C
 PSSu BP-C 2/16S
 PSSu BP-C 2/16C
][BA_Basismodule Digital(-T) breit
The PSSu E PD1-T module may be used in conjunction with the follow-
ing base modules:
 PSSu BP 2/16S-T
 PSSu BP 2/16C-T
 PSSu BP-C 2/16S-T
 PSSu BP-C 2/16C-T
INFORMATION
The module is supported by
 PSSuniversal Configurator and PSSuniversal Assistant from
Version 1.4.0
 PAS4000 from Version 1.1.1
– We recommend that you always use the latest version
(download from www.pilz.de).