3 safety, 1 intended use, 2 system requirements – Pilz PNOZ mmc7p CC User Manual
Page 7: Section 3, Safety, Intended use, System requirements

Safety
Operating Manual PNOZ mmc7p CC
1003066-EN-01
7
Safety
Intended use
The fieldbus module PNOZ mmc7p CC is an expansion module of the configurable control
system PNOZmulti. It is used for communication between the configurable control system
PNOZmulti and the CC-Link .
CC-Link is designed for fast data exchange at field level. The expansion module CC-Link is
a passive subscriber (Slave) in CC-Link. The basic communication functions with CC-Link
conform to CC-Link V1.10. The central controller (master) reads input information from the
slaves and writes output information to the slaves as part of each cycle. As well as the cy-
clical transfer of usable data, the expansion module PNOZ mmc7p CC also has diagnostic
and commissioning functions. Data traffic is monitored on the Master/Slave side.
The expansion module may only be connected to a base unit from the configurable control
system PNOZmulti (please refer to the document "PNOZmulti System Expansion" for de-
tails of the base units that can be connected)
The configurable control system PNOZmulti is used for the safety-related interruption of
safety circuits and is designed for use in:
}
E-STOP equipment
}
Safety circuits in accordance with VDE 0113 Part 1 and EN 60204-1
The expansion module may not be used for safety-related functions.
Intended use includes making the electrical installation EMC-compliant. The product is de-
signed for use in an industrial environment. It is not suitable for use in a domestic environ-
ment, as this can lead to interference.
The following is deemed improper use in particular:
}
Any component, technical or electrical modification to the product
}
Use of the product outside the areas described in this manual
}
Use of the product outside the technical details (see chapter entitled “Technical De-
tails”)
System requirements
Please refer to the "Product Modifications" document in the "Version overview" section for
details of which versions of the base unit and PNOZmulti Configurator can be used for this
product.
3
3.1
3.2