Datalogic Scanning 4420 - Manual (Page 71)

Firmware Update Utility
Product Reference Guide 3-11
1. On the PC, click Start > Programs > Firmware Update Utility > Firmware
Update Utility .
2. Set Communicate Using to the communications port to which the dock
is attached to ( ActiveSync, USB, COM1 or COM2.)
3. Click browse ( ... ) and navigate to the file location.
4. Select the current * .img file and click
Open .
5. Verify that the Falcon is turned on. Insert the Falcon into a powered
dock connected to the host computer.
6. Click Update Terminal on FUU on the host PC.
7. FUU will restore the firmware on the Falcon as shown on page 3-9 .