Datalogic Scanning 4420 - Manual (Page 173)

Product Reference Guide G-1
Appendix G
Programming Bar Codes
Overview
This appendix provides bar codes for common setup parameters for program-
ming the Falcon 44xx. Factory default settings are underlined.
To make settings that are not provided in the chapter, you can design custom
bar codes or use the Falcon Management Utility (FMU) to program the Fal-
con. Refer to Configuring the Falcon, on page
2-1 .
1D Symbologies
Symbologies and bar code setup parameters included in this appendix are:
• "Predefined Defaults" on page G-3 .
• "Codabar" starting on page G-3 .
• "Code 39" starting on page G-5 .
• "Code 93" starting on page G-8 .
• "Code 128" on page G-10 .
• "EAN-13" starting on page G-12 .
• "EAN-8" on page G-14 .
• "Interleaved 2 of 5" on page G-15
• "Matrix 2 of 5" on page G-17
• "MSI" starting on page G-19 .
• "Pharmacode 39 (Code 32)" on page G-21 .
• "RSS-14" on page G-21 .
• "RSS Limited" on page G-22 .
• "RSS Expanded" on page G-22 .
• "Standard 2 of 5" starting on page G-24 .
• "Trioptic" on page G-26 .
• "UPC-A" starting on page G-26 .
• "UPC-E" on page G-28 .