Datalogic Scanning 4420 - Manual (Page 44)

Configuring the Falcon
2-28 Falcon
®
4400 Series with Windows
®
CE
Owner
To change the Owner default settings:
1. Select Start > Settings > Control
Panel > Owner Properties . The
Input Panel opens to facilitate
entering data.
2. Enter data using the input
panel or the keypad on the
PDA.
3. To exit the Owner Properties
control panel, tap OK on the
control bar, or press on
the keypad.
For more information on using the Net-
work ID tab, refer to "Setting Up the
Network ID" on page 4-8 .
Password
To change the Password default set-
tings:
1. Select Start > Settings > Control
Panel > Password Properties .
2. Enter the desired password
twice as indicated in the two
fields.
3. Select to enable password pro-
tection at power-on and/or
enabling password protection
for the screen-saver.
4. To exit the Password control
panel, tap OK on the control
bar, or press on the
keypad.