Datalogic Scanning 4420 - Manual (Page 174)

Programming Bar Codes
G-2 Falcon
®
4400 Series with Windows
®
CE
• "UPC/EAN Extensions" on page G-29 .
2D Symbologies
• "Aztec Code" starting on page G-30 .
• "DataMatrix" starting on page G-32 .
• "Composite" starting on page G-34 .
• "Maxicode" starting on page G-36 .
• "OCR" on page G-38 .
• "PDF-417" starting on page G-39 .
• "MicroPDF-417" starting on page G-41 .
• "QR Code" starting on page G-43 .
• "Other Controls" starting on page G-45 .
Depending on which Falcon model you have, some programming parameters may
not be available on your unit. Refer to Table F-2 on page
F-3 and Table F-3 on
page F-24 for specific details on which parameters are applicable.