Datalogic Scanning 4420 - Manual (Page 13)

Product Reference Guide 1-1
Chapter 1
Batteries and Power
Overview
This section contains the following topics:
• "Suspend Mode" starting on page 1-1
• "Battery Warnings and Cautions" on page 1-2
• "Battery Disposal" starting on page 1-4 .
Suspend Mode
The Falcon will go into a suspend or sleep mode when it is idle for a period of
time. This duration can be customized using the
Power control panel (refer to
"Power Off Tab" on page 2-30 . Suspend mode works and looks just like you
have turned the unit off. Press to suspend (put to sleep) the Falcon.
Press again for the Falcon to resume its previous state.
Use the Battery Power control panel to set the idle duration and the initiation
of suspend mode. These features save battery power when the Falcon is not in
use. Refer to "Power Off Tab" on page
2-30 for more information.
Suspending
The following conditions will put the unit into suspend (sleep) mode:
1. When the unit is on, press for 0.5 second to initiate suspend
mode.
2. When the sleep timer expires, indicating that there has been no use
for a specified period of time.
3. A discharged battery pack.