Datalogic Scanning 4420 - Manual (Page 43)

Network and Dialup
Product Reference Guide 2-27
Network and Dialup
To change the Network and Dialup connection settings, complete these
steps:
1. Select Start > Settings > Network and Dialup Connections .
Figure 2-18. Changing Network & Dialup Settings.
2. Double-tap the connection to view or change the settings. The
SDCCF10G1 item shown in the example above can vary, depending
on the radio installed and the number of connections.
3. Complete the two tabs as shown in Figure 2-18 :
• IP Address : Select DHCP or set static IP settings.
• Name Servers : If using static IP, set DNS and WINS servers.