Epson WorkForce 610 Series - Manual (Page 42)

42 Maintaining Your All-in-One
Replacing Ink Cartridges
Make sure you have a new ink cartridge before you begin. You must install new
cartridges immediately after removing the old ones.
Caution:
Do not open ink cartridge packages until you are ready to install the ink. Cartridges are
vacuum packed to maintain reliability.
Leave the expended cartridge(s) installed until you have obtained a replacement, or the
ink remaining in the print head nozzles may dry out.
1. Turn on your product.
If a cartridge is expended, you see a message on the
display screen. Note which cartridges need to be
replaced and press
OK . (You cannot print until you
have replaced any expended ink cartridges.)
If you’re replacing a cartridge before you see a message on the display screen,
press the
Home button, press
l
,
r
,
u
, or
d
to select Setup , then press OK .
Press l or r to select Maintenance , then press OK . Select Ink Cartridge
Replacement and press OK .
2. Lift up the scanner, then open the cartridge cover.
3. Squeeze the tab on the cartridge and lift it straight
up. Dispose of it carefully. Do not take the used
cartridge apart or try to refill it.
Warning:
If ink gets on your hands, wash them thoroughly with
soap and water. If ink gets into your eyes, flush them
immediately with water. Keep ink cartridges out of the
reach of children.