Epson WorkForce 610 Series - Manual (Page 24)

24 Faxing a Document or Photo
■ To redial the last fax number you used, press Redial/Pause . The last fax
number is displayed on the screen.
■ To specify a different time to send your fax, press Menu , press l or r to select
Fax Send Settings , press OK , and select Send Fax Later . Then press
r
and
select On . (You cannot send or receive any faxes until the delayed fax has been
sent or cancelled.)
■ Press Menu and select Poll to Receive to receive a fax from another fax
machine to which you have dialed (such as a fax information service).
Receiving Faxes
Before receiving faxes, make sure you load plain paper and select the Paper Size
setting that matches the size of paper you’ve loaded (see page 19). If the incoming
fax pages are larger than the paper size you loaded, the fax size is reduced to fit or
printed on multiple pages, depending on the
Automatic Reduction setting you
select.
If you run out of paper during printing, you see the error message Paper out .
Load more paper and press the
x Start button to continue.
To receive faxes automatically, make sure the Auto Answer light on the control
panel is turned on. To turn it on, press the Auto Answer/Space button.
Note:
To change the number of rings before your product answers, see page 17.
To receive faxes manually, press the Auto Answer/Space button to turn off this
feature (and the light). Then follow these steps:
1. When your telephone rings, lift the phone off the
hook. You see this screen:
2. Select Receive , then press OK .
3. If you want to receive the fax, press the x Start
button.
4. After all the pages are received, you see the screen
shown above. Replace the phone on the hook.