Epson WorkForce 610 Series - Manual (Page 23)

Sending a Fax 23
4. Press
u
or
d
to select Color or B&W .
Note:
If the recipient’s fax machine prints only in black and white, your fax is
automatically sent in black and white even if you select Color.
5. Press OK , if desired, to see a summary of your fax transmission settings.
6. Press
x Start to send your fax.
To cancel faxing, press y Stop/Clear Settings .
If you are scanning with the Automatic Document Feeder, your document is
automatically scanned and faxed.
If you placed your document on the scanner glass,
you see this screen after the first page is scanned:
If you need to fax additional pages, select Yes and
press OK . Then place your original on the scanner
glass and press OK to continue. If you don’t need to
fax another page, select No , then press OK .
Note:
If the fax number is busy, you see a redialing message and the product redials after
one minute. To redial immediately, press Redial/Pause.
Other Ways to Dial a Fax Number
In addition to manual transmission, here are some other ways you can enter a fax
number:
■ If you’ve connected a telephone to your product, you
can dial the fax number from the phone. When you
see the screen at right, select
Send , then press OK .
Note:
Don’t hang up the phone until the product begins
transmitting the fax.
■ To select a speed dial or group dial entry, press
Speed/Group Dial/Backspace . Select or type the
number of the speed dial entry you want to use,
then press
OK .