Epson WorkForce 610 Series - Manual (Page 22)

22 Faxing a Document or Photo
8. Press
u
or
d
to highlight a speed dial entry, then press
r
to add it to the group
dial list.
Note:
To remove a speed dial entry that you selected, press
u or d to highlight the
entry, then press l .
9. Repeat step 8 to add additional speed dial entries to the group.
10. When you’re finished, press OK .
11. If you want to create another group dial list, repeat steps 5 through 10.
Printing Your Speed Dial or Group Dial List
To print your speed dial or group dial list, follow these steps:
1. Press the Home button until Fax is selected, then press OK .
2. Press Menu , then
l
or
r
to select Fax Report , and
then press OK . You see this screen:
3. Select Speed Dial List or Group Dial List and
press OK .
4. Make sure letter-size paper is loaded, then press
x Start to print your list.
Sending a Fax
You can send a fax by manually entering a fax number (as described below),
redialing the previous fax number, or selecting an entry from your speed dial list.
1. Place your original(s) for faxing (see page 9).
2. Press the Home button until Fax is selected, then press OK .
3. Use the numeric keypad to enter the fax number.
You can enter up to 64 digits.
Note:
To dial the number using your telephone, by redialing, or
by selecting from your speed dial list, see the next
section.