Epson WorkForce 610 Series - Manual (Page 26)

26 Printing From a Memory Card
The image files on your card must meet these requirements:
2. To remove the card, make sure the memory card access light is not flashing,
then pull the card straight out of its slot.
Caution:
Do not remove the card or turn off the product while the memory card access light
is flashing; you may lose data on the card.
Selecting Photos From the Screen
1. Load Epson photo paper. See page 7 for a list.
2. Press the Home button until Print Photos is
selected, then press OK .
3. Press
l
or
r
to select View and Print Photos , then
press OK .
4. Press
l
or
r
to move through your photos and
display the one that you want to print.
5. To print more than one copy, press + or – to select the number of copies you
want of that photo.
6. If you want to crop your photo and enlarge the resulting image area to fit onto
your paper, press Display/Crop .
■ To resize the image area, press + or – .
■ To move the image area, use the arrow buttons.
■ To rotate the image area, press Menu .
To check the zoomed image, press OK . Press OK again if you are satisfied with
the changes, or press Back if you need to make further edits.
7. Press l or r to view other photos, select the number of copies, and crop, if
desired.
File format JPEG with the Exif version 2.21 standard
Image size 80 × 80 pixels to 9200 × 9200 pixels
Number of files Up to 999 (If there are more than 999 photos on the
card, you can select a group of photos to display.
See your online Epson Information Center.)