Waldorf Largo - Manual (Page 63)

Sound Parameter
63 Largo User´s Manual
w
Please note that the setting of the Mix parameter
doesn’t affect the strength of the overdrive effect but
only the volume of it. Therefore, you can get a very
strong overdrive with a low volume when you turn
up Drive and turn down Mix.
Delay
A Delay is an effect that produces echoes of the input
signal.
Clock on / off
Synchronizes the Delay to the song tempo of your host
application.
Delay 0...127 or 1/512t...12 bars
Sets the length of the Delay tap up to three seconds. The
Delay pop-down menu offers a range of usefull musical
values. It is only available when Clock is et to On.
Spread -64...0...+63
Spreads the left and right delay output to half of the delay
time maximum. Leftmost and rightmost settings create a
typical ping pong delay.
Speed 0...127
The delay effect can be modulated in ist delay time with
the integrated LFO. Speed dtermines the frequency of this
LFO.
Depth 0...127
Controls the modulation depth when delay time is
changed by means of the LFO. The depth ranges from no
delay to the amount set by the Delay parameter.
Polarity positive / negative
Determines whether the feedback signal is fed back into
the delay line as is, or is inverted beforehand.
Feedback 0…127
Controls the amount of signal that is routed back into the
Delay line. Lower values therefore produce fewer echoes
than higher values.
Cutoff 0…127
Dampens the signal produced by the Delay effect. This
filter is routed before the feedback circuitry meaning that
adjacent taps of the Delay will be dampened further. This